Installing The Optional Caster Wheel Accessory - Zephyr PRB24C01AS-OD Guide D'utilisation, D'entretien Et D'installation

Installation Instructions

Installing the Optional Caster Wheel Accessory

To convert the stationary unit into a mobile unit, please follow the instructions below. Installing the
optional caster wheel accessory should require at least two people to prevent injury.
Optional Caster Wheel Accessory #: PRCAST-C001
1. Empty all contents within the outdoor beverage cooler and close the door afterwards. Lay the unit
gently down on its right side.
2. Remove the leveling legs from the outdoor beverage cooler by twisting the leveling legs
counterclockwise. Perform this step for each leveling leg.
3. Install a caster wheel with 4 provided screws. Perform this step for each corner.
4. Set the beverage cooler back to its upright position. Place all contents back into the outdoor
beverage cooler.
22
1
R o F
o C
3
PRB24C01AS-OD Use, Care, and Installation Guide
P R E S R V ™
B E V E R A G E
C O O L E R
O U T D O O R
2
4
R o F
o C