Carbon Filter; Installing The Handle - Zephyr PRB24C01AS-OD Guide D'utilisation, D'entretien Et D'installation

Installation Instructions

Carbon Filter

A built-in carbon filter protects your beverages by acting
as a natural barrier against harmful odors. The carbon
filter should be replaced every 3-6 months depending on
the unit's exposure level to odor. If the unit is placed in a
kitchen, regular replacement every three months is ideal.
Remove the carbon filter by turning counterclockwise to
unlock from rear panel.
Carbon Filter Replacement Part #: Z0F-C004

Installing the Handle

If contemporary handles are desired, refer below for the part number.
1. Push aside the door gasket on the side you wish to install the handle. Under the gasket you will see
two designated holes for handle installation and pre-installed screws.
2. Install the handle tightly as shown with two screws, lock washers and flat washers pre-installed.
Gasket
Flat Washer
Locked Washer
Screw
18
Zephyr Presrv Contemporary Handles
Part #: PRHAN-C101
Part #: PRHAN-C102
Part #: PRHAN-C104
Pro Style
Handle
Part #: PRHAN-C001
Door Frame
PRB24C01AS-OD Use, Care, and Installation Guide
Color: Stainless Steel
Color: Brushed Gold
Color: Matte Black
Zephyr Presrv Pro Handle
Color: Stainless Steel
P R E S R V ™
B E V E R A G E
C O O L E R
O U T D O O R