General Notes On Operation; Setting Time And Weekday - Renkforce RS2W Mode D'emploi

10. General notes on operation

a) Setting Time and Weekday
• Push the button "FUNC" when the radio measuring
display/thermostat is ready until you can see "Me-
ter" in the upper left of the display. Now push the
button "FUNC" for more than three seconds.
• The display for the weekday will now flash. Button
"+/ON" or "-/OFF" until the right day is set.
• Now push the button "FUNC" again. The hours dis-
play will flash. Push the button "+/ON" or "-/OFF" to
set the proper number of hours.
• Now push the button "FUNC" again. The minutes
display will flash. Push the button "+/ON" or "-/OFF"
to set the proper number of minutes.
• Now push the button "FUNC" again. Setting of
weekday and time is ended.
In some countries, the time is switched from winter to summer time in spring and from
summer to winter time in autumn. The radio measuring display/thermostat time must
be switched to the current time manually every time in this case. Also observe whether
possibly set time windows (see chapter 10) are still correct or sensible.
26
Figure 4