Declaration Of Conformity; Technical Data; Impact Drill - Bosch GSB Professional 21-2 Notice Originale

OBJ_BUCH-909-004.book Page 15 Wednesday, January 13, 2016 11:44 AM
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.

Technical Data

Impact Drill

Article number
Rated power input
Output power
No-load speed
– 1st gear
– 2nd gear
Rated speed
– 1st gear
– 2nd gear
Impact frequency at no-load
Rated torque (1st/2nd gear)
Electronic torque control
Speed preselection
Constant electronic control
Right/left rotation
Key type drill chuck
Keyless drill chuck
Fully automatic spindle locking (Auto-lock)
Safety Clutch
Spindle collar dia.
Maximum drilling diameter (1st/2nd gear)
– Concrete
– Brickwork
– Steel
– Wood
Chuck clamping range
Weight according to EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Bosch Power Tools

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-1.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
05.05.2014
GSB ... 21-2 21-2 RE
3 601 ... A9C 0.. A9C 5..
W 1100 1100
W 630 630
-1
min 900 0 – 900
-1
min 3000 0 – 3000
-1
min 580 580
-1
min 1900 1900
-1
min 51000 51000
Nm 9.6/3.2 9.6/3.2
– –

–
– –

–

–

–

–
 
mm 43 43
mm 22/13 22/13
mm 24/16 24/16
mm 16/8 16/8
mm 40/25 40/25
mm 3 – 16 1.5 – 13
kg 2.9 2.9
/II /II
English | 15
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
21-2 RE 21-2 RCT 21-2 RCT
A9C 6.. A9C 7.. A9C 8..
1100 1300 1300
630 695 695
0 – 900 0 – 900 0 – 900
0 – 3000 0 – 3000 0 – 3000
580 900 900
1900 3000 3000
51000 51000 51000
9.6/3.2 7.8/2.6 7.8/2.6
 
–
  
 
–
  
 
–

–

–
  
43 43 43
22/13 22/13 22/13
24/16 24/16 24/16
16/8 16/10 16/10
40/25 40/25 40/25
1.5 – 13 1.5 – 13 1.5 – 13
2.9 2.9 2.9
/II /II /II
2 609 932 948 | (13.1.16)
–
–