Monster Semruk S7 V8.1 Manuel De L'utilisateur page 27

EN
To configure the displays using the Project menu:
1. Attach your external display(s) to the appropriate port,
and turn it(them) on.
2. Press the + P (or Fn + F7) key combination.
3. Click on any one of the options from the menu to select
PC screen only, Duplicate, Extend or Second screen only.
4. You can also click Connect to a wireless display at the
bottom of the Project screen and follow the steps to
connect to any wireless enabled display.
To configure the displays using the Display control panel:
1. Attach your external display(s) to the appropriate port, and turn it(them) on.
2. Right-click the desktop and select Display settings from the menu.
3. Click the Detect button.
4. The computer will then detect any attached displays.
5. You can configure up to 3 displays from the Multiple displays menu.
4 Connected Displays
Note that when 4 displays are connected, only 2 displays may be configured
in Duplicate mode.
26
Figure 18- Project
Figure 19- Display
(Multiple displays)