Full Color "Per Key" Led Keyboard - Monster Semruk S7 V8.1 Manuel De L'utilisateur

Keyboard Settings-Express Text
A single key can be set to send a string of text within any application using
Express Text.
1. Enable and select Keyboard Macro under your chosen profile, click to select
a key, and then click to select Express Text.
2. Click the Record
is the key used in your target program to open a text message).
3. Click in the Text Content field and type in your message and click Save.
4. Click the Record
is the key used in your target program to send a text message e.g the Enter
key would be the most commonly used).
5. The key will now be configured to send the text message in the target
program under your chosen Profile, and the key will appear in blue.
6. If you want to remove any Express Text key, select it and click on Restore.
Keyboard Settings - Disable
You can use the program to disable any keys not required.
1. Enable and select Keyboard Macro under your chosen profile, click to select
a key to disable, and then click to select Disable.
2. The key will now be disabled.
3. If you want to enable the key again, select it and click on Restore.
4. The key will be disabled under your chosen Profile, and the key will appear
in gray.
KB Brightness
You can adjust the keyboard brightness using the Brightness slider.

Full Color "Per Key" LED Keyboard

You can change the colors for individual keys on the full color "Per Key" LED
Keyboard. The LED Keyboard application can be accessed by clicking LED
Keyboard in the Control Center (or by pressing the Fn plus
Start menu in Windows
button in Start key and press a key (the Start key
button in Send key and press a key (the Send key
.
EN
key) or from the
21