Led Mode - Keyboard Effect - Monster Semruk S7 V8.1 Manuel De L'utilisateur

EN

LED Mode - Keyboard Effect

Click on Keyboard Effect (under LED Mode) and then click any of the Effect
buttons to view the effects on the keyboard. You can also adjust the LED Speed
for the effects from the buttons on the right. Some effect colors can set to
Random or Custom.
Breath
Wave
Blink
Scan
Ripple
Random
Snake Table 5 - Keyboard Effects
KB Sleep Timer
Enable and then select the amount of time for which the system is idle before
the keyboard LED enters sleep mode (i.e. the LED keyboard illumination will turn
off to save power).
KB Brightness
You can adjust the keyboard brightness using the Brightness slider.
Light Bar
Click LED Keyboard in the Control Center to access the LED Keyboard
application (see Figure 15 on page 20). Click on Light Bar (under LED Mode).
You can use the Light Bar control to configure the lighting. The Light Bar effect
features different lighting modes, some of which can be set to Random or
Custom colors. The Light Bar can also be adjusted for Brightness and LED Speed.
Figure 15 - LED Mode - Light Bar
23