Bodum Electric Blender Stick K11179-3 Mode D'emploi page 7

SPECIAL ADVICE
BEFORE USING
THE BLENDER
STICK
HOW TO USE THE
BLENDER STICK
output rating of at least 6 A. (Use a residual current device
(RCD) – please contact a qualified electrician for advice.) The
wall outlet must be easily accessible while the appliance is in
use in case of emergency. The manufacturer is not responsi-
ble for accidents caused by poor or inexistent grounding of
the appliance.
If the plug provided with the appliance is incompatible with
the wall outlet, have it changed by a qualified electrician.
MAINS CORD
If care is taken, a mains extension cable can be used.
If a mains extension cable is used, its electrical rating must at
least match that of the appliance; if the appliance is earthed,
the extension cable must be a three-core earthed cable. The
lengthened cable must not be allowed to hang over the edge
of the table or counter: children must not be able to pull on it,
and it must not be allowed to present a trip hazard.
FOR USA – CANADA
This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug will fit
in a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in any way.
Clean the blender and the accessory attachments before
using them for the first time. Using a clean, damp cloth,
wipe the motor unit, blender wand and blender head. Wash
the accessory attachments, beaker and lid in hot water.
Washing-up liquid can be used, but never abrasive cleaners.
Do not immerse the motor unit in water.
1. Insert the plug in a wall outlet.
2. If using the beaker accessory, do not fill it past the maxi-
mum fill line. Insert the blender in the mixture. The blender
wand should be immersed no deeper than its own length. Do
not immerse the motor unit in the mixture.
3. Press one of the two buttons to operate the blender.
4. To stop the blender, release the button before removing
the blender from the mixture.
5. Unplug the cord from the wall outlet immediately after use.
9
EN