Important Safety Instructions - Pro-User LI1200A Mode D'emploi

The Pro-User LI1200A is a member of the family of advanced mobile Li-Ion Jump Starters manufactured
by Pro-User Europe GmbH. The Pro-User Li-Ion-Jump Starter enables you to securely start your 12V or
24V vehicle in case your battery is weak. You can boost your car battery up to 10 times on a full charge.
As a bonus we built-in 2 USB-Ports for powering or charging e.g. your sat nav or cell phone. A built in
ultra-bright LED flashlight helps you jump-starting your vehicle at night or serves as a signal light.
We have taken numerous measures in quality control to ensure that your product arrives in top condition
and will perform to your satisfaction.
Please carefully read and follow the safety and operating instructions. Not following these instructions
may result in a serious accident, including damaged property, serious or even fatal injuries. If the device
is passed on to another person, this manual must also be handed over with it.
CAUTION: Please read this instruction manual carefully before starting up the device. Do
not operate the device unless you have fully read and understood all the provided
information. If you are not confident working with 12V/24V DC voltages or are unsure
of what you are doing, consider to seek for help by a professional breakdown service
(roadside towing service) or your vehicle´s manufacturer. Failure to observe these
instructions may cause an electrical shock, fatal or serious injury, material damage or
impair the function of the device.
Pro-User accepts no liability for direct or indirect damage caused by faulty assembly or connection, a
faulty usage, a usage of altered units or units that are known as damaged, a usage for purposes other
than described and especially caused by failure to follow these instructions.
Read your car´s owner's manual!
Some vehicle manufacturers have special requirements before jumpstarting the vehicle (e.g. fuses that
have to be removed or certain security demands). Some vehicles manufacturers place the battery in the
cargo area or trunk. These vehicles often have designated jump-start terminals.
CAUTION: This System is intended to be used only on vehicles with a 12 Volt and 24
Volt DC automotive battery. Do not use the jump starter on 6V systems or for other
things than the intended usage. Not following these instructions could cause serious
personal injury or material damage.
CAUTION: Never touch or connect the red to the black clamps - This can cause dangerous
sparks, electric arcing or explosions. Use in dry environment only. Keep the unit dry and
clean. Do not use the unit close to open fire. Do not operate the unit in explosive
atmospheres, such as in the presence of flammable liquids, gases or dust. Stop charging
or using the device and power-off the device, if the unit is getting hot, is smoking or
leaks any liquid.
INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

3