Operating Instructions; Functions - M Confort ELITE 8 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Operating instructions

4.1. Filling water: fill up the water tank until the orange water level indi-
cator reach the top of water level scale.
Caution: do not fill water above the limit of water level scale.

4.2. Functions:

4.2.1. POWER: press POWER button to turn on the machine. Press this
button again to turn it off and its red light will illuminate.
4.2.2. SWING: press this button to let the vertical front grille swing auto-
matically and its light will illuminate. Press the button again to stop
swing mode, and its light will turn off.
4.2.3. FAN SPEED: press this button to adjust wind speeds to low (1),
medium (2) or high (3). Speed lights (1,2,3) indicate current selected
speed.
4.2.4. ANION: press this button to turn on ANION mode. Press it again to
turn it off.
4.2.5. COOL: Press this button to start COOL mode. Water pump will flow
to the cooling pads until they saturate. Air flowing through the machine
will rise its humidity and low its temperature.
Remarks: When the fan speed is set on HIGH or MEDIUM, if COOL button is pressed,
the fan will drop to the lower level for 30 seconds before resuming the speed
previously set.
4.2.6. MOSQUITO REPELLENT: Press this button to start MOSQUITO
REPELLENT mode. The machine emits ultrasonic wave to repel mosqui-
tos. Push the button again to turn this mode off.
05

Publicité

Table des Matières
loading

Table des Matières