Setup The Sound - J5create JUA250 Manuel De L'utilisateur

The functions of the USB Display Adapter will be activated after the computer
restarted. You might see the extend display shown on the display device.
You can modify the corresponding position of each extend display via display
settings. Go to "START" → "Control Panel" → "Appearance and Personalization" →
"Adjust screen resolution"
※ Right-click on the desktop and go to "Screen Resolution"
When the 'Screen Resolution' window appears, each monitor's number can be
identified by clicking "Identify." Drag the monitor to the location you want.

Setup The Sound

Microsoft's audio system restricts the audio function to one output at a
time; therefore, when using the USB HDMI multi-display adapter only one
output will receive audio.
The following explains how to set-up and change the default sound
output from the display device connected with the USB HDMI Display
Adapter.
1. Go to "Control Panel> Hardware and Sound" and select "Changes
system sounds"
12