Information About Radio Operation; Maintenance And Cleaning - REV MAX! Cube Mode D'emploi

12. Information about radio operation

Radio transmission is performed on a non-exclusive
transmission path, which means that there is a possibility
of interference occurring. Interference can also be caused
by switching operations, electrical motors or defective
electrical devices.
The range of transmission within buildings can differ
greatly from that available in the open air. Besides the
transmitting power and the reception characteristics of the
receiver, environmental factors such as humidity in the vi-
cinity have an important role to play, as do on-site structu-
ral/screening conditions.
REV Ritter hereby declares that the . model is in
accordance with the underlying requirements and other
relevant provisions of Directive 1999/EC. For the complete
CE Declaration of Conformity please refer to www.rev.biz
under the article in question.
The product does not require any maintenance. Enlist
the help of an expert to carry out any repairs. Clean the
product using a soft, lint-free cloth that is clean and dry.
You may dampen the cloth a little with lukewarm water in
order to remove more stubborn marks. Do not use any de-
tergents containing solvents, as they could corrode the
plastic housing and label.
Disconnect the device from the power supply system
before commencing cleaning.

13. Maintenance and cleaning

21