Maintenance And Cleaning - Oase FiltoSkim 3000 Notice D'emploi

- English -
Start-up
Important:
● This skimmer is designed to work with a pump. PUMP NOT INCLUDED. The pump switches on automatically
when power connection is established.
1. Switching on the pump: Connect power plug to the socket.
2. Switching off the pump: Disconnect the power plug.

Maintenance and cleaning

Attention! Dangerous electrical voltage.
Possible consequences: Death or severe injury.
Protective measures: Prior to reaching into the water, disconnect the power supply to all units used in the water.
Disconnect the power plug prior to carrying out work on the unit.
●
Occasional cleaning of the skimmer and pump will be necessary to ensure the proper functioning of the system.
● Remove the natural material from top of skimmer, then remove the cover, then remove the debris basket and dump the
leaves and other debris out. Clean the debris basket and the inside of skimmer with a garden hose.
Storage/Winterization
● Remove pump and follow the pump's instructions for storage/winterization.
Disposal
Do not dispose of this unit with domestic waste! This product can be recycled. Further information about the recycling
of this product can be obtained from your local municipal authority.
Troubleshooting
Issue Cause
The unit is not Pump power supply not
performing connected
Inappropriate pump size
Debris basket clogged
Insufficient flow Pump is clogged
Debris basket clogged
Tubing blocked
Tubing kinked
Excessive flow loss in
the tubing due to friction
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or
email us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
Solution
Connect pump power supply
Check packaging for proper pump sizing
Check and dump the leaves and other debris out from the debris basket.
Check and clean pump
Check and dump the leaves and other debris out from the debris basket.
Clean or replace tubing
Eliminate kink, replace tubing if it is damaged
Reduce tubing length to reduce frictional loss
7