Digital Control Panel - Impecca IPAC-08NR Mode D'emploi

DIGITAL CONTROL PANEL

1. Remote control sensor
2. Digital display
• Fan mode: indicates present room temperature
• Cool/Dry mode: indicates desired temperature
• Timer mode: indicates the remaining time
NOTE: if the temperature sensor fails, the display will continuously read 77°F or 25°C
3. Temp/Time button
While the device is continuously operating, press this button to adjust the pro-
grammed room temperature using the up and down arrow buttons.
4. Operating mode
The current operating mode is indicated by the adjacent LEDs. If the LEDs are illu-
minated while the unit is not in operation, empty the water receptacle.
5. Timer button
• Press this button while the unit is running to program a shutdown time set
using the up and down arrow buttons.
• Press this button while the unit is in standby mode to program a startup time
set using the up and down arrow buttons.
6. Fan speed button
Choose the fan speed rate between High, Medium, and Low.
7. On/Off button
Turn the unit on or off. The power indicator LED illuminates when the device is
powered on.
8. Mode button
Select the unit operating mode between Cool, Dry, and Fan.
–4–