Safety Warnings - Impecca IPAC-08NR Mode D'emploi

SAFETY WARNINGS

1. Do not stop unit operation by pulling the power cable out of the wall outlet.
Electrical shock, unit damage, and fire hazards may result in addition to other
accidents.
2. Connect your unit directly to a properly grounded wall-mount electrical socket.
Never connect the unit with an extension cable or outlet splitter of any kind, which
may result in electrical shock, overheating, fire hazards, or other accidents.
3. Do not press, stretch, kink, damage, heat, deform, or modify the power cable in
any way. Doing so may result in electrical shock, electrocution, overheating, fire
hazard, or other accidents. Should your units power cable be damaged in any way,
contact technical support immediately for a replacement solution.
4. Do not operate the unit with wet or damp hands. Doing so may result in electric
shock, electrocution, or other accidents.
5. Ensure the power receptacle and unit plug are free of dust, rust, and other cor-
rosion before connecting the unit. Failure to do so may lead to electrical shock,
electrocution, fire hazards, or other accidents.
6. Do not use the unit with underrated fuses, circuit breakers, or electrical wiring.
An insufficient electrical system can result in unit failure, unit damage, unit per-
formance issues, electrical shock, electrocution, fire hazards, or other accidents.
7. Never place the unit near open-flames or burners as the operation of the unit can
create a fire hazard or induce a lack of oxygen in confined spaces.
8. Never place flammable objects near the air conditioning unit such as insecticides,
paint, spray paint, or other aerosols. Never spray products on the unit as it may
result in fire hazards or other accidents.
9. Never insert sticks or other foreign objects into the unit. The rotating blades may
break and cause bodily damage and result in fire hazards or other accidents.
10. Do not wash the air conditioner unit with water or other liquids. Instead, use a dry
dusting cloth. Should the unit surfaces be exceptionally dirty, use a cloth slightly
dampened with warm, soapy water. May result in electrical shock, electrocution,
fire hazards, or other accidents.
11. Never use the following types of substances on the unit to avoid deformation,
damage, and fire/electrical hazards: hot water (over 100°F/40°C), gasoline, paint
thinners, benzene, kerosene, detergents, corrosives, or abrasives.
12. Do not let the cooled air blow directly on your body, as it may result in per-
sonal discomfort or be harmful to your health such as inducing hypothermia
in hot climates.
13. Should your unit remain unused for a prolonged period of time, please turn the
unit power off and then disconnect the power cable to ensure safety.
14. Should an operating abnormality arise (such as a burning smell), stop the unit
IMMEDIATELY, then disconnect the power cable and contact technical support.
–2–