Suggestions Before Measurement; Download Application - VISIOMED BewellConnect MyTensio BW-BA1 Mode D'emploi

4-5. SUGGESTIONS BEFORE MEASUREMENT

- The first time you use the device, please charge the battery using the USB port provided. Con-
nect the USB cable provided to your computer to charge the device. When the device is fully
charged, please unplug the USB cable.
- Avoid eating, smoking or exercising 30 minutes before taking measurements. Relax for 15 mi-
nutes before taking blood pressure.
- Stress increases blood pressure. Avoid taking measurements during stressful periods.
- You must take blood pressure in a calm environment and you must be relaxed and seated with
your arm on a table.
- Remain stationary and do not speak whilst taking blood pressure.
4-6. INSTRUCTIONS
See diagram B page 2
Do not take measurements over clothing. Remove jewelry from the arm you are measuring before taking
measurement (watch, ring, bracelet etc.).
- Sit down on a chair with your feet flat on the floor (do not cross your legs).
- Ensure your mobile phone or tablet with the BewellConnect® app is within reach.
- Put the blood pressure monitor around the arm with the orange marker at the bottom.
- It must be 0.7 - 1.1 in / 2-3 cm from elbow crease. The orange marker must lie on the inside arm's
artery.
- Close the velcro (not too tight).
- Press ON/START to turn the blood pressure monitor on. The blue LED lights up.
- Put your arm on the table, palm up so that the blood pressure monitor is level with the heart.
- Remain seated and calm for 5 minutes before taking measurement.
Note : For more reliable results, take measurements on the same arm. The measurement results are given
for information. If in doubt about your results, please contact your doctor.

4-7. DOWNLOAD APPLICATION

The following information may be altered.
Download the BewellConnect® app on your mobile phone or tablet :
- App store or Google Play
- scan the QR Code on the side of the box
bw
M y
Then click on the MyTensio icon.
4-8. USER GUIDE
Launch the BewellConnect® app and click on MyTensio.
- Press START on the screen (app) to begin measurement.
- The armband inflates automatically. 3 blood pressure measurements are repeated automatically.
- The armband inflates and deflates three times in a row based on the MyTensio app procedure.
12 BewellConnect - BW-BA1 - User Manual - 122016V1