Numark DM3050 Manuel D'utilisation Du Propriétaire page 2

OR
TO AMP
TO AMP
1. Make sure all items listed on the
front of this guide are included
in the box.
2. READ SAFETY INSTRUCTION
BOOKLET BEFORE USING THE
PRODUCT.
3. Study this setup diagram.
4. Place mixer in an appropriate
position for operation.
5. Make sure all devices are turned
off and all faders and gain knobs
are set to "zero"
6. Connect all stereo input sources
as indicated in the diagram.
7. Connect the stereo outputs to
power amplifier(s), tape decks,
and/or other audio sources.
8. Plug all devices into AC power.
MIXER QUICK SETUP
HOUSE AMP
BOOTH AMP
CD BURNER
TAPE DECK
TO LINE
FROM RECORD
CD PLAYER CD PLAYER
TO LINE
TO PHONO 2
9. Switch everything on in the
following order.
• audio input sources (i.e.
turntables or CD players)
• mixer
• last, any amplifiers or
output devices
10. When turning off, always
reverse this operation by,
• turning off amplifiers
• mixer
•
last, any input devices
11. Go to http://www.numark.com
for product registration.
More information about this
product may be found at
http://www.numark.com
TO LINE
TO PHONO 1
TO LINE
TO LINE