nedis RDDB5000 Série Mode D'emploi page 7

Using your DAB+ radio
Changing the DAB display information
It is possible to change the Information that Is displayed on the third line of the display when
listening to a DAB station. Note that this information is not available when listening to conventional
AM/FM stations. There are seven types of information available listed below with examples listed to
the right of the text. To change the information displayed press the display button repeatedly.
Press Display
Press Display
Press Display
Press Display
Press Display
Press Display
Press Display
Dynamic label segment (DLS)
This Is scrolling text information supplied by
the DAB station. It may comprise information
on music titles or details of the programmer
and is provided by the broadcaster.
Program type (PTY)
This is a description of the type of
programmer provided by the DAB station and
is provided by the broadcaster.
Multiplex name
This will show the multiplex that is
broadcasting the programmer you are
listening to.
Time and date
This displays the time and date and is
provided by the broadcaster, so will be
accurate.
Channel and frequency
This displays the channel number and the
transmission frequency.
Signal information
This shows the digital bit-rate and the signal
mode.
Signal error rate
If the transmission signal contains errors the
system can apply correction.
The amount of signal correction can be
displayed as a numerical value between 0
and 99. As the value increases, you will hear
the signal degrade.
To improve reception, try adjusting the
position of the aerial.
7