Description Of Symbols; Safety Warnings; Instructions Prior To Installation; Description Of Accessory - Baxi MS THINK+ Instructions D'installation

DESCRIPTION OF SYMBOLS

WARNING
Risk of damage to or malfunction of the appliance. Pay special attention to the warnings concerning
danger to people.
DANGER - HIGH VOLTAGE
Live components - electrocution hazard.
IMPORTANT INFORMATION
Information to read with particular care as it is useful for the correct operation of the boiler.
GENERIC PROHIBITION
It is forbidden to do/use the things indicated alongside the symbol.

SAFETY WARNINGS

Do not leave any packaging (plastic bags, polystyrene, etc.) within the reach of children as they are a potential source of danger.
The appliance is not intended to be used by persons with reduced physical, sensory or mental capacities, or who lack
experience or knowledge, unless, through the mediation of a person responsible for their safety, they have had the benefit
of supervision or of instructions on the use of the appliance.

INSTRUCTIONS PRIOR TO INSTALLATION

• The boiler must be only installed by qualified technicians.
• Before proceeding with installation of the boiler, the system must be adequately cleaned (see the boiler instructions manual).
• Before switching on, make sure all the electrical connections have been made correctly.
• Carefully read the boiler instructions manual.
• The appliance must be installed in the special template box supplied separately.

1. DESCRIPTION OF ACCESSORY

Using the MS THINK+ appliance, with open manifold, it is possible to carry out the simultaneous management of a mixed system
comprising a high-temperature zone (≤ 80°C) and two low-temperature zones (≤ 45°C). The compact dimensions of the frame
(depth 210 mm) allow easy concealed installation or wall-mounted installation. The MS THINK+ product is equipped with a
circulating pump serving the high-temperature zone, controlled by a zone ambient thermostat. Each low temperature zone
comprises an electronically controlled mixing valve, pump, flow sensor and limit thermostat. Each zone can be controlled with the
room thermostats or the Remote Control units. The MS THINK+ appliances are available in 2 versions:
Low temperature
KIT MODEL
zone 1
1AT-2BT ●
1AT-1BT
●
The MS THINK+ models can only be combined with boilers in the PLATINUM range.
7222520.03 (1-11/15)
Low temperature
high temperature zone
zone 2
●
12
●
●