Battery Replacement - PCE 35.1110 Mode D'emploi

TFA_No. 35.1110_Anleit_D_GB_F
CRYSTAL CUBE – Wireless weather station
2. After inserting the batteries into the outdoor transmitter the
transmittor will automatically transmit the temperature to the
weather station on channel 1.
3. For having more than one external transmitter, select a differ-
ent channel (2 to 3) for every transmitter by pressing the CH
button on the transmitter while the channel number is flash-
ing (after starting up of the transmitter).
4. Press once for channel 2 and twice for channel 3. The LED is
flashing once for channel 1, twice for channel 2 and three
times for channel 3.
5. The temperatures will appear on the weather station (channel
1 - 3) if the transmission as been successful.
→ You can also start the transmitter search manually, without
restarting the basic unit and the first transmitter. Press and
hold the button B 6 on the base station for two seconds.
Then press the "RESET" button on the transmitter using a
pointed object and start with step 3.
7.12 Positioning of display unit and transmitter
• Choose a shady and dry position for the transmitter. (Direct
sunshine falsifies the measurement and continuous humidity
strains the electronic components needlessly).
• Place the display unit at the final position. Avoid the vicinity
of any interfering field like computer monitors or TV sets and
solid metal objects.
• Check the transmission of the signal from the transmitter to
the display unit (transmission range 50 m free field, within
ferro-concrete rooms, especially with metal parts, the
received signal is naturally weakened.
36
09.05.2011 9:04 Uhr Seite 19
CRYSTAL CUBE – Wireless weather station
• If necessary choose another position for transmitter and/or
display unit.
• Use the transmitter for mounting or standing when the signal
is received successfully.
8. Care and maintenance
• Clean the instrument and the transmitter with a soft damp
cloth. Do not use solvents or scouring agents. Protect from
moisture.
• Remove the batteries if yo do not use the product for a
lengthy period.
• Keep the instrument in a dry place.

8.1 Battery replacement

• Replace the batteries when the battery symbol of the weather
station appears on the display on the lower left hand. If
operation is exclusively with the mains adapter, the battery
symbol is displayed permanently.
• When the batteries of the transmitter are used up, the low
battery icon appears next to the outdoor temperature dis-
play.
• Open the battery compartments and insert the new batteries.
Make sure they have the correct polarity. Close the covers
again.
• Please note:
When the batteries are changed, the contact between trans-
mitter and receiver must be restored – so always insert new
batteries into both units or start a manual transmitter search.
37