PCE 35.1110 Mode D'emploi page 14

TFA_No. 35.1110_Anleit_D_GB_F
CRYSTAL CUBE – Wireless weather station
• Pull the plug out of the socket immediately if any fault occurs
or if the unit is not used for a lengthy period.
• Only use the supplied mains adapter.
• First connect the lead to the basic unit and then insert the
mains plug into the socket.
• Do not pull the plug out of the socket by its lead.
• Route the mains lead so that it does not come into contact
with sharp-edged or hot objects.
Caution!
Risk of injury:
• Keep the batteries out of reach of children.
• Batteries must not be thrown into the fire, short-circuited,
taken apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be
changed as soon as possible to prevent damage caused by a
leaking battery. Remove the batteries if you do not use the
product for a lengthy period. Never use a combination of old
and new batteries together nor batteries of different types.
Wear chemical-resistant protective gloves and glasses when
handling leaked batteries.
Important information on product safety!
• Do not place any objects on the basic unit.
• Do not expose the instrument to extreme temperatures,
vibration or shock.
26
09.05.2011 9:04 Uhr Seite 14
CRYSTAL CUBE – Wireless weather station
• The outdoor transmitter is protected against splash water,
but is not watertight. Choose a shady and dry position for the
transmitter.
5. Elements
A: Display (Fig. 1):
A 1: Weather forecast by symbols (3D and on LCD)
A 2: Indicator for alarm 1/alarm 2 activated
A 3: Radio-controlled symbol DCF
A 4: Indication of time with seconds, weekday, date or alarm
time
A 5: Channel number of the remote sensor 1 - 3 or indicator for
indoor temperature
A 6: Indicator for auto scroll of remote channels
A 7: Outdoor transmitter symbol
A 8: Indication of outdoor temperature (channel 1 - 3) or indoor
temperature
B: Buttons (Fig. 2):
B 1: Button for time/calendar/alarm
B 2: Change from °C/°F
B 3: ▲
B 4: ▼
B 5: Recall the highest and lowest temperature
B 6: Indoor temperature and alternating channel
B 7: Animation OFF/AUTO/ON switch
B 8: Backlight LCD OFF/DIM/BRIGHT switch
B 9: RESET button
27