Weather Forecast Symbols; Display Light; Additional Transmitters - PCE 35.1110 Mode D'emploi

TFA_No. 35.1110_Anleit_D_GB_F
CRYSTAL CUBE – Wireless weather station
• Press and hold the button B 5 for 2 seconds while the maxi-
mum or minimum values are displayed to clear the recorded
maximum and minimum readings and the actual value
appears.

7.6 Weather forecast symbols

• The weather station has 4 different weather icons (sunny,
partly cloudy, cloudy and rainy).
• The animated rolling display will pause in the place of the
current forecast symbol. The current forecast symbol is per-
manently shown on the top of the LCD.
• The weather forecast symbols indicate an improvement or
worsening of the future weather conditions based on the
current weather, which does not have to correspond exactly
with the weather indicated on the symbol.
7.7 Animation and display light
• Slide the animation AUTO/OFF/ON switch on the backside to
choose the following options:
1. Position "AUTO": Display light and animation for 16 sec.
(with power adapter 24 sec.), manually triggered via
SNOOZE button, automatically in the selected illumina-
tion cycle.
34
09.05.2011 9:04 Uhr Seite 18
CRYSTAL CUBE – Wireless weather station
2. Position "ON": Display light and animation in continuous
operation (only with power adapter), with battery opera-
tion like position "AUTO".
3. Position "OFF": Animation is off.
7.8 Illumination cycle (for position AUTO)
• Press and hold the button B 2 for 2 seconds to enter the illu-
mination cycle setting mode.
• Press ▲ or ▼ button to select the following options: 5, 10, 20,
30 or 60 minutes. A longer illumination cycle will save more
battery power.
7.9 Animation on/off
• Confirm the illumination cycle setting with the button B 2. Press
▲ or ▼ button to switch animation on ("ON") or off ("OFF").
When the animation is switched off, only the appropriate 3D
weather symbol lights up. Confirm with the button B 2.

7.10 Display light

• The sliding switch LCD OFF/DIM/BRIGHT can be used to con-
trol the display light intensity.
→ Position OFF: Display light is off.
→ Position DIM: Display light is dim.
→ Position BRIGHT: Display light is bright.

7.11 Additional transmitters

1. Start up the basic unit and the first transmitter as described in
the manual.
35