Measuring Range - HemoCue Hb 201+ Manuel D'utilisation

Measuring range

0–256 g/L (0–25.6 g/dL, 0–15.9 mmol/L).
Results above 256 g/L (25.6 g/dL, 15.9 mmol/L) will be displayed
as HHH.
Limitations
HemoCue Hb 201 Microcuvettes are for In Vitro Diagnostic use
only. The HemoCue Hb 201 + Analyzer is only to be used together
with HemoCue Hb 201 Microcuvettes. For further limitations of the
procedure, see the HemoCue Hb 201 Microcuvettes instructions for use.
Technical Specifications
Dimensions: 85×160×43 mm
Weight: 350 g (batteries included)
4 batteries type AA, 1.5 V
Mains adapter: CE marked
Only use adapters as recommended in the table, last in Specifications
after section Manufacturer.
Pollution degree: 2
Overvoltage category: II
The instrument is tested according to IEC 61010-1, Second edition:
2001 and EN 61010-1: 2001, IEC/EN 61010-2-101: 2002, IEC 61326-1:
2005 and EN 61326-1: 2006, IEC 61326-2-6, First edition: 2005 and
EN 61326-2-6: 2006, IEC 60601-1-2, Third edition: 2007 and EN
60601-1-2: 2007 and complies with the IVD Medical Device
Directive 98/79/EC. The instrument is made for continuos mode.
Essential Performance
The essential performance is quantitative determination of
hemoglobin in capillary, venous or arterial whole blood.
Warranty
The analyzer carries a 24-month warranty from the day of receipt.
After the warranty period service/repair is carried out at fixed prices.
Any other use of the system than recommended by the manufacturer
will void the warranty.
Service and Disposal
The analyzer should be cleaned as recommended under Maintenance
prior to service or disposal. Consult local environmental authorities
for proper disposal.
Spare parts – Accessories
The following spare parts and accessories are available:
Mains adapter
Battery Lid
PC programme
Cables for PC and printer connection
HemoCue Cleaners
Hard Carrying Case
HemoCue Lancets
HemoCue Hb 201 + Control Cuvette
48