Warranty Provisions - Zibro SRE 159 E Manuel D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

transportation cap

We recommend that you remove dust and stains in time with a damp cloth,

because otherwise these may cause stains that are hard to remove.

Do not remove any heater components yourself. Always contact your Zibro

dealer for repairs. When the power cord is damaged, it may only be replaced

by an authorised fitter. Use a new cord of the type H05 VV-F.

STORAGE (END OF THE HEATING SEASON)

At the end of the heating season, you must store the heater in a dust-free place, if

possible in its original packaging. Unused fuel cannot be used in the next heating

season. We therefore recommend that you burn up all fuel. If there is still some

fuel left, do not throw it away, but dispose of it in accordance with the local

regulations for the disposal of domestic chemical waste.

Always start the new heating season with fresh fuel. When you start re-using the

heater follow the instructions again (starting from section A and as specified).

TRANSPORTATION

Take the following measures to avoid fuel leakage during the transportation of

the heater:

Let the heater cool down.

Remove the removable tank ¶ from the heater and remove the fuel filter

(refer to Section M, Fig. N). Some drops may leak from the filter; keep a cloth

at hand. Store the fuel filter and the removable tank outside the heater.

Place the transportation cap into the position of the fuel filter (Fig. O).

Press it tight.

Always move the heater in an upright position.

SPECIFICATIONS

Ignition

Fuel

Capacity (kW) max.

Capacity (kW) min.

Suitable space (m

)

Fuel consumption (l/hr)

Fuel consumption (g/hr)

Burning time per tank (hr)

Capacity removable tank (litres) 5.4

Weight (kg)

* At maximum setting