Saving Your Settings; Example; Configuration Overview - Marmitek IR455 B&O to X-10 converter Mode D'emploi

5.2.4. Saving your settings

Once you have programmed all your settings, they can be saved to the IR455 by pressing
'Store'. You can then disconnect the unit from the PC. The settings are saved even in the
event of a power failure.

5.3. Example

You want to use button 1 to control the
Marmitek X-10 module on address B1
You want the green button to set module
B1 to 30% and module B2 to 45%

5.4. Configuration overview

When using the buttons in the 'Configuration' window and the button GET FROM FILE, a
configuration overview is shown.
The following codes are used:
Light 1 = 1:A1-100,2:,3:,4:,5:,6:,7:,8:
THIS MEANS:
Module A1 ON (100%)
(+ space for 7 other settings)
IR455
You want to use button 2 to control the
Marmitek X-10 module on address B2
You want the yellow button to turn
off all your modules on HouseCode B
9