Selecting The On-Screen Display (Osd) Language; Checking The Dtv Signal Strength; Selecting Closed Captions - Insignia NS-PDP42 Guide De L'utilisateur

Zoom 2–Extends the image vertically, and crops
the top and bottom of the image.
Selecting the on-screen display (OSD)
language
To select the OSD language:
1 Press MENU, then press
OPTION. The OPTION menu opens.
2 Press , then press
Language.
3 Press , then press
language you want. Your plasma TV
remembers the language you selected and
will always use that language when
displaying the OSD menus.
4 Press EXIT to return to TV viewing, or press
MENU to return to the previous menu.

Checking the DTV signal strength

If you are in DTV or CADTV mode and the
reception is poor, you can check the DTV signal
strength. If the signal strength is poor, you many
need to adjust your antenna or digital cable
input.
To check the DTV signal strength:
1 Press MENU, then press
SETUP. The SETUP menu opens.
20

Selecting closed captions

or to select
Analog TV
or to select
or to select the
Digital TV
or to select
www.insignia-products.com
Insignia NS-PDP42 42" Plasma TV-720P
2 Press , then press or
Signal.
3 Press EXIT to return to TV viewing, or press
MENU to return to the previous menu.
Closed captioning information is provided by the
broadcaster. Not all programs have closed
captions.
Your plasma TV remembers which closed
caption mode you selected even if you turn off
your plasma TV.
To select an analog TV closed caption mode:
1 Press CCD one or more times to select the
closed caption mode you want. You can
select Off, CC1, CC2, CC3, CC4, Text1,
Text2, Text3, or Text4.
2 Press EXIT to save you selection and return
to TV viewing.
Note
You can also select a closed caption mode from
the OPTION menu.
To select a digital TV closed caption mode:
1 Press MENU, then press
OPTION. The OPTION menu opens.
2 Press , then press or
Caption/Text.
to select DTV
or to select
to select