Turning The Appliance On; Cooling - Bosch B1 RKM 16002 Mode D'emploi

Turning the appliance on

Cooling

Mode
21
22
Plug your appliance in.
Lead the hot-air expulsion duct outdoors.
Turn the appliance on using the "On/Off" button.
Select the "Temperature control"
the mode button. Fig. 21.
Set the required temperature with the
Speed
buttons. Fig. 22.
Select the desired operation mode with the
Ventilator mode button:
"Manual"
be set manually to five different levels (1:
minimum,...,5: maximum). Ventilator speed is
set using the buttons
(decrease). The speed selected appears on the
digital display screen. When the "manual"
button is pressed again, the temperature
appears and when it is pressed twice, the time
is displayed.
"Turbo"
performed automatically when this mode is
selected. The appliance starts up at maximum
temperature control power and adapts to room
atmosphere conditions directly, without passing
through each of the levels, until the desired
temperature is reached. This operation mode
provides maximum power and simplicity of use.
"Silencioso"
performed automatically when the silent mode
is selected. The appliance starts reducing the
temperature control power and adapts to room
atmosphere conditions directly, without passing
through each of the levels, until the desired
temperature is reached. This operation mode is
very silent and simple to use.
The appliance cools and dehumidifies the air in
the room at the same time in order to produce
pleasant air conditions.
Should the appliance turn itself off by effect of
the thermostat, it will come back on again when
room temperature rises 2°C.
: The speed of the ventilator can
(increase) and
: Temperature regulation is
: Temperature regulation is
function with
and
37