Metabo HPT RP 3608DA Mode D'emploi page 21

The Table 7 shows the state of remaining battery
indicator lamp and the battery remaining power.
NOTE
Do not give a strong shock to the display panel
or break it. It may lead to a trouble.
2. Cleaner
Install batteries and press the battery switch of
the remaining battery indicator lamp to check
the displays for each battery. (Fig. 31)
The lamps will only light while the battery
switch of the remaining battery indicator lamp
is pressed.
The numbers 1 and 2 of the remaining battery
indicator lamp represent the numbered slots in
which the batteries are installed. (Fig. 31, 32)
Battery number
Battery
Remaining battery
indicator lamp
Fig. 31
Battery
Battery number
Fig. 32
Table 7
State of lamp Battery Remaining Power
Lights ;
The battery remaining power is
over 75%.
Lights ;
The battery remaining power is
50% – 75%.
Lights ;
The battery remaining power is
25% – 50%.
The battery remaining power is
less than 25%. Recharge the
battery soonest possible
Check the cleaner's remaining battery indicator after
switching off the main unit.
English
21