Metabo HPT RP 3608DA Mode D'emploi page 18

English
NOTE
Do not tilt the tank with accessories (Pipe,
Master nozzle, etc.) inserted in the base or in
the tank. Otherwise any part may be damaged.
WARNING
If the appliance is pushed on its side while the
tank contains liquid, the liquid will get inside
the motor or switch region, causing an electric
shock or motor failure.
(1) Remove the clamps (2 pieces) and raise the
handle of the head. (Fig. 20)
(2) Lightly striking the inner side of the fi lter several
times, remove dusts attached to the fi lter.
(3) Tilt the tank and dump dusts. (Fig. 21)
(4) Attach the fi lter, the fi lter cage, the head, and
the clamp in the initial positions.
Handle
Filter
Tank
Tank
18
Head
Filter cage
Clamp
Fig. 20
Fig. 21
7. Transportation and storage
(1) How to use the handle (Fig. 22)
When carrying or moving the appliance, hold
the handle of the head part. When you do not
use the handle, put it in the head part.
(2) Fixation and release of the caster (Fig. 23)
By lowering the lever of the caster with the
brake, the rotation of the wheel is fi xed. When
releasing the fi xed wheel, raise the lever. When
moving with the appliance on a vehicle, fi x the
caster to retain the appliance. However, when
you move the appliance, check that the caster
is released, or the caster will be damaged.
Release
Tank
(3) Tool box assembly (Fig. 24)
Tank
Handle
Head
Fig. 22
Fix
Lever
Caster
Fig. 23
Hook bolt
Tool box
(2XC only)
Fig. 24