INFOSEC UPS SYSTEM E4 LCD Evolution 10K TM Manuel Utilisateur page 90

Battery mode Description
LCD display
Bypass mode Description
LCD display
Battery Test Description
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
89
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 06 14 AA 59 203 46
When the input voltage is beyond the acceptable range or power failure,
UPS will backup power from battery and alarm will beep every 4 seconds.
When input voltage is within acceptable range and bypass is enabled, turn
off the UPS and it will enter Bypass mode. Alarm beeps every two minutes.
When UPS is in AC mode or CVCF mode, press "Test" key for more than 0.5s.
Then the UPS will beep once and start "Battery Test". The line between I/P