INFOSEC UPS SYSTEM E4 LCD Evolution 10K TM Manuel Utilisateur page 82

17: Phase auto adapt enable/disable

Interface
3-7-2. 30K
Programs available list for parameter 1:
Code Description
01 Output voltage
02 Output frequency
03 Voltage range for bypass
04 Frequency range for bypass
05 ECO mode enable/disable
06 Voltage range for ECO mode
07 Frequency range for ECO mode
08 Bypass mode setting
Maximum battery discharge time
09
setting
10 Inverter outputs parallel function
11 Reserved
12 Neutral loss detection
13 Battery voltage calibration
14 Charger voltage adjustment
15 Inverter A voltage adjustment**
16 Inverter B voltage adjustment**
17 Inverter C voltage adjustment**
18 Output A voltage calibration***
19 Output B voltage calibration***
20 Output C voltage calibration***
*Y means that this program can be set in this mode.
Note: All parameter settings will be saved only when UPS shuts down normally with internal or external battery connection.
(Normal UPS shutdown means turning off input breaker and bypass breaker in bypass/no output mode).
**To adjust inverter voltage correctly in 30KVA model, please contact your local dealer for help.
***Output voltage setting value should be the same to the output voltage measured from output terminal.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
81
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 06 14 AA 59 203 46
Setting
Parameter 2: it always shows PH.A as phase auto adapt
function.
Parameter 3: Enable or disable phase auto adapt function. You
may choose following two options:
DIS: disable phase auto adapt function.
accept one condition which the phase difference of L2 and L1 is
120º and phase difference between L3 and L2 is 120º.
ENA: enable phase auto adapt function. Then, the UPS can accept
either inputs of L1, L2, L3 in the same phase or the phase
difference between L2 and L1 with 120º, L3 and L2 with 120ºor
phase difference between L2 and L1 240º, and L3 and L2 with
240º.
Bypass /
No Output mode
Y*
Y
Y
Y
Y
Y
Y
Y
Y
Y
Reserved for future options
Y
Y
Y
the UPS only can
Then,
AC ECO CVCF Battery
mode mode mode
Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Battery
mode Test
Y Y
Y Y
Y Y
Y Y
Y
Y
Y
Y
Y
Y