Operations; Button Operation; Led Indicators And Lcd P - INFOSEC UPS SYSTEM E4 LCD Evolution 10K TM Manuel Utilisateur

3. Operations

3-1. Button Operation

Button
ON/Enter Button
OFF/ESC Button
Test/Up Button
Mute/Down Button
Test/Up + Mute/Down
Button
* CVCF means Constant Voltage and Constant Frequency.
3-2. LED Indicators and LCD Panel
LED Indicators:
There are 4 LEDs on front panel to show the UPS working status:
Mode LED
UPS On
No Output mode
Bypass mode
AC mode
Battery mode
CVCF mode
Battery Test
ECO mode
Fault
●
Note: means LED is lighting, and
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 06 14 AA 59 203 46
Function
 Turn on the UPS: Press and hold the button more than 0.5s to turn on the UPS.
 Enter Key: Press this button to confirm the selection in setting menu.
 Turn off the UPS: Press and hold the button more than 0.5s to turn off the UPS.
 Esc key: Press this button to return to last menu in setting menu.
 Battery test: Press and hold the button more than 0.5s to test the battery while in AC
mode and CVCF* mode.
 UP key: Press this button to display next selection in setting menu.
 Mute the alarm: Press and hold the button more than 0.5s to mute the buzzer. Please
refer to section 3-4-9 for details.
 Down key: Press this button to display previous selection in setting menu.
 Press and hold the two buttons simultaneous more than 1s to enter/escape the setting
menu.
LCD panel
Bypass Line
●
○
●
○
○
○
●
●
○
○
means LED is faded.
Battery
● ●
○ ○
○ ○
●
○
●
○
●
○
● ●
●
○
○ ○
LED indicators
Fault
●
○
○
○
○
○
○
○
●
68