Factory Reset; Cleaning The Device; Action; Disposal - brennenstuhl BREMATIC PRO SmartHome Mode D'emploi

Wireless flush-mount actuator with switch wiring 868.3 MHz

Factory Reset

The device can be restored to the factory settings at any time. A reset
will be required if malfunctions occur.
Press the pair button for at least 6 seconds.
The LED will flash rapidly and go out after approx. 3 seconds.
The device has been reset.

Cleaning the Device

DANGER! RISK OF ELECTRIC SHOCK!
Disconnect the device from the mains before cleaning.
Do not allow liquids to enter the device. Liquids entering can result
in a short circuit.
Clean the device with a dry, lint-free cloth. For tough dirt, you
may also slightly dampen the cloth.
Do not clean with solvent-based cleaners. These could damage
the device surface and markings.
Never immerse the device in water or other liquids. The product
may otherwise be damaged.
Ensure the device is completely dry before using it again.

Action

Problem Possible cause
LED doesn't flash. Device has not
been installed
correctly.
The circuit breaker
is not switched on.
Device not The device is
detected. outside the
Gateway range.

Disposal

The packaging is made from environmentally-friendly
materials which can be disposed of through your local
recycling facilities.
Contact your local refuse disposal authority for more details of how to
dispose of your worn-out product.
14 EN

Service

For questions related to the product, please contact us at
www.brematic.com/en/service.
Tel.: 0080048720743 (toll-free)

Manufacturer

Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 ∙ D-72074 Tübingen
H. Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra-t ag
Blegistrasse 13 ∙ CH-6340 Baar
www.brematic.com
Action
www.brennenstuhl.com
Have installation
carried out
correctly. Check if

Declaration of conformity

there is power.
Hugo Brennenstuhl GmbH & Co.KG, hereby declares the wireless system
Switch on the
model UPMS 868 01 W400 3726 to comply with directives 2014/53/EU
circuit breaker.
and 2011/65/EU (RoHS II). The full text of the EU declaration of conformity
is available at the following internet address:
Reduce the distance
www.brematic.com/en/service/konformitaetserklaerung /ke_
to the Gateway.
1294710.pdf
This product complies with the legal, national and European requirements.
All company names and product names are trademarks of the respective
owners.
All rights reserved.
To help protect the environment, please dispose of the
product properly when it has reached the end of its
useful life, not in the household waste. Please contact
your municipality for information on collection facilities
and their opening hours.