Maintenance; Replacing Filters; Replacing Light Bulbs - Vissani U5H300A15 Manuel De L'utilisateur

Maintenance

REPLACING FILTERS

When filters need replacing, exchange with similar. Also replace
filters that are damaged with punctures, bends, or broken
frames .
- Turn off the range hood and disconnect the power .
- Remove the filters (1) by pulling the handles (2).
- Replace with an equivalent filter, then reconnect the
power .

REPLACING LIGHT BULBS

When light bulbs burn out, replace them with LED or halogen
JDR16, GU10 twist and lock base light bulbs (MAX. 35 watts).
- To remove the bulb (1), twist it in the indicated direction
and remove it from the socket .
- To install a replacement bulb (2), insert the bulb into the
socket and twist it in the indicated direction until it locks
into place .
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance .
Touching circuitry inside the range hood while it is energized
will result in death or serious injury .
WARNING:
Failure to replace worn out or damaged filters
will increase the risk of fire.
A
1
WARNING:
Light bulbs can become hot when turned on .
Do not touch bulbs until they are switched off and cooled .
Touching hot bulbs could cause serious burns .
2
14
2
1