Installation (continued)
Installation
INSTALLING THE CHARCOAL FILTER
(SKIP THIS STEP IF YOU ARE USING EXTERIOR VENTING)
NOTE:
The charcoal filter should only be installed if you are not using an external venting system.
- Turn over the range hood (A) and place its top on a protective surface .
- Unhook the charcoal filter support (2) from the support hook (3) and pull the charcoal filter support up.
- Place the charcoal filter (B) under the charcoal filter support (2). Ensure that the filter is placed horizontally, or the charcoal filter
support (2) will not close properly .
- Slide the charcoal filter support (2) to the left or right in its braces (4) until you can re-hook it on its support hook (3).
B
A
3
2
B
3
2
4
11
Please contact 1-800-514-6729 for further assistance.
4
HOMEDEPOT .COM