Profile 545144210 Mode D'emploi page 69

545144210
REMOTE CONTROL
The device can also be operated with the included remote control.
POWER Turn the unit ON or OFF.
MODE Press the MODE button to switch between
modes: cooling, heating, ventilating and
dehumidifying.
FAN Switch between high, medium and low fan
speed.
LED Turn the LED light on or off.
Press the UP button to increase the desired
temperature or timer duration.
Press the DOWN button to decrease the
desired temperature or timer duration.
SILENT Put the fan in sleep mode. The fan will run
slower and the unit will make less noise.
SWING Turn the SWING function on or off (this
function only works with the remote
control).
TIMER Press the TIMER button to set the timer.
FUNCTIONS
POWER
MODE
MONOBLOCK AIR CONDITIONER
Press POWER to turn the device on or off.
Press MODE to switch between the 4 different modes. The display will
show the symbol of the selected mode.
The 'cooling' mode defaults to 22°C and cools the air while
directing warm air outside. The desired temperature can be
set using the UP/DOWN buttons between 16°C and 30°C. The
fan speed can be adjusted with the speed button.
COOLING
In the 'dehumidifying' mode, moisture is extracted from the
air,
which will be drained outside using the installed drain pipe
The fan speed cannot be adjusted in this mode.
DRY
In fan mode the appliance will recirculate the air within the
room, and will not cool,
heat or dehumidify. The fan speed can be adjusted using the
FAN
Speed button.
NL
.
14