Operation; Requirements At The Place Of Use; Setting Up The Charger; Charging The Batteries - Swiss Made Xplorer Traduction De La Notice Originale

7 Operation

7.1 Requirements at the place of use

• Observe the manual (see chapter Specifications).
• Outdoor electrical sockets must be fitted with a residual current device (RCD).
• The work place must have adequate lighting.
• The electrical socket must be easily accessible so that the device can be quickly discon-
nected from the mains.
• It must be used beyond the reach of children.
• The charger's power cord must not be taut or kinked.
• Make sure there is adequate ventilation.

7.2 Setting up the charger

1
Abb. 3

7.3 Charging the batteries

1
Abb. 4
34
Position the charger (1) on a fixed, level, dry
‹
and clean surface.
Connect the AC adapter (2) to the charger.
‹
2
Plug the AC adapter into the power socket.
‹
3
The continuous green light on the lower LED
‹
(3) signals that the AC adapter is correctly
plugged into the power socket and the charger
is supplied with power. The charger is ready to
operate (see also Chapter 6.4).
Press both sides of the battery latch (1) and
‹
remove the battery.
Check the battery terminals for foreign objects
‹
and dirt.
Cattle and Horse Clippers