Joie I-Quest signature Mode D'emploi page 7

!
The load leg has 24 positions.
When the load leg indicator shows
red this means the load leg is in the
wrong position. 6
!
Make sure the load leg is in full
contact with the vehicle floor pan.
Red means it is installed
incorrectly.
6
!
Check to make sure the base is
securely installed by pulling on
both ISOFIX connectors.
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
7
!
The load leg must be installed
correctly with green indicator.
Removing the base
To remove the base, press the
secondary lock button -1
8
then the ISOFIX releasing button
on the ISOFIX connectors before
removing the base from the vehicle
seat. 8
11
7
-1
-2
7
1
8
first and
-2
8
2
Use Side Impact Protection
see images
1. The enhanced child restraint is
delivered with detachable side
impact protection. This side impact
protection must be used on the
door side of the vehicle for best
protection. Installation shown in
fig. 9
2. Press the release button to remove
side impact protection.
2
1
-
9 10
9
10
10
2
1
12