Tools Needed - Kobra SSD Mode D'emploi

PACKAGING
The machine is supplied secured to a wooden pallet in order to ensure it remains intact during shipping.

Tools needed:

Hammer
-
Forklift with minimum lifting capacity of 800 Kg
-
Pliers or strap cutters
-
Size 13 hex wrench
-
1) Cut the straps and remove the cardboard.
Tools needed: strap cutters or pliers
2) Remove the top pallet
3) Remove the side transport brackets
Tools needed: Size 13 hex wrench
4) Remove the KOBRA Model SSD from the pallet.
Equipment needed: forklift
Warning!!! The KOBRA Model SSD must be lifted from the pallet on the forklift by the front right
side
The KOBRA Model SSD is fitted with casters for ease of handling and positioning.
To put the KOBRA Model SSD in position make sure the front wheels are unlocked.
It takes at least two people to manoeuvre the machine into position.
DO NOT push the machine on a slope or you could lose control of the machine and cause damage or
personal injury.
25