Canon imagePROGRAF GP-300 Guide D'installation page 11

7
Performing Print Head Adjustment
Instructions are now shown on the touch screen for loading the paper for adjustment. Load the paper by following the instructions.
1
Tap OK.
2
Tap Manual.
5
Insert the paper straight into the feed slot, with the
printing side facing up, so that the right edge of the paper
is aligned with the paper alignment guide (A) on the right
side of the roll paper cover.
Insert the paper until the edge makes contact and you
hear 2 short beep sounds.
Important
● This printer allows only 1 sheet to be loaded. Do not load 2 or
more sheets. Doing so may cause a paper jam.
● If the paper is wavy or warped, it may cause a paper jam. Flatten
out the paper before loading it.
7
The screen for selecting the paper type appears. Tap the
type of paper you loaded.
In this case, tap Coated papers then Coated papers.
3
Slide the width guide (A) to align it
with a marker indicating the size of
the loaded paper. In this example,
align the guide to A2, which is
the size of the provided paper for
adjustment.
6
A
8
10
4
Prepare 1 sheet of paper for
adjustment.
Identify the printing side by referring
to the bag in which the paper came.
Important
● Return unused paper to the bag in which
it came and store it away from high
temperature, high humidity, and direct
A
sunlight.
Adjust the position of the width guide (A) according to the
size of the loaded paper.
Align the width guide exactly with the paper to avoid the
loaded paper from tilting or crinkling.
A
Proceed to "Selecting the Method of Connecting to Your
Computer" (P. 11).