Chord Database; Metronome; Switching Metronome On/Off; Selecting Beat Type - Renkforce MC37A Notice D'emploi

18. Chord Database

The internal database for chords displays the notes and keys for the
respective chord in the display.
• Press the button "LESSON/CHORD DICT" (18); the display shows
"DICT".
• The clavier keys above "#G3" (see label below the clavier on the
keyboard casing) serve to determine the chord type, the keys abo-
ve "C5" to determine the base chord.
After chord type and base chord are entered, the display shows
the keys to be pressed at the same time for this chord.
• Now press the key combination displayed to play the chord.
If you have pressed the right keys, an applause sound is also out-
put.

19. Metronome

a) Switching Metronome On/Off
• Press the button "METRO" (22) to switch on the metronome; the
corresponding metronome sound is output.
• The metronome speed can be adjusted with the two "TEMPO"
buttons (9).
• Pressing "METRO" (22) again switches off the metronome again.
b) Selecting Beat Type
• Press "FUNCTION" repeatedly until the display shows "BET 4".
• With the buttons "+" or "-", you can select the desired beat type
(basic setting is "4").
42