Setting Volume For The Accompanying Rhythm, Buttons "Acc. Vol; Setting Speed For The Accompanying Rhythm, Buttons "Tempo; Automatic Accompanying Music ("Auto-Bass-Chord"), Button "A.b.c - Renkforce MC37A Notice D'emploi

d) Setting Volume for the Accompanying Rhythm, Buttons "ACC. VOL"
The accompanying rhythm volume can be set with the two "ACC.
VOL." (8) buttons.
The display shows the volume level as a bar chart, see circle in the
figure on the right.
e) Setting Speed for the Accompanying Rhythm, Buttons "TEMPO"
• When switching the accompanying rhythm, the matching speed is
set as well.
The two buttons "TEMPO" (9) can be used to adjust the accompa-
nying rhythm speed as desired (e.g. from "110" to "90" BPM, beat
per minute).
Keep the respective button pressed for quick adjustment.
If you switch to a different accompanying rhythm while an
accompanying rhythm is played, the current speed (e.g.
"90") is maintained!
• Press the two buttons "TEMPO" (9) at the same time to restore the
basic settings for speed of the current accompanying rhythm.
f) Automatic Accompanying Music ("Auto-Bass-Chord"), Button "A.B.C."
• Press the button "A.B.C." (2) to activate the so-called "Auto-Bass-
Chord" function („A.B.C." is displayed at the top left of the dis-
play).
Press one or several buttons in the left area of the clavier de-
pending on the desired chord. The designation for the respective
chord appears at the top left of the display.
Example: Press the "STYLE" button (11) and select accompanying
rhythm "12". Press the button "A.B.C." (2) to activate the "Auto-
Bass-Chord" function. Press the "START/STOP" (3) or "SYNC/
FILL" (4) button. Select the desired chord in the left area of the
keyboard.
• To deactivate this function, press the button "A.B.C." (2) again.
40