Dry Vacuum Cleaning; Wet Vacuum Cleaning - Verso M410 Mode D'emploi

4 Operation
4.1 Setting the angle of inclination
4 Operation
A A
6
A A

4.2 Dry vacuum cleaning

A
7

4.3 Wet vacuum cleaning

WARNING:
Risk of fire or explosion! Do not vacuum up
explosive, flammable or aggressive liquids.
Only use the hand-held vacuum cleaner to
vacuum up regular domestic liquids.
A
8
20
NOTE:
B Depending upon requirements, for wet vac-
uum cleaning in particular, you can angle
the appliance into one of four positions.
1. Hold the appliance securely with one hand
on the handle and the other on the dust
container.
2. Slide the three-in-one switch forward
(Fig. 6/A) and with the other hand move
the appliance into the desired position.
B
3. Release the three-in-one switch and push
the handle gently in the opposite direction
(Fig. 6/B) until it locks into place.
B
NOTE:
Depending upon requirements, you can
attach the crevice nozzle (Fig. 7/A) to con-
centrate the airflow of the vacuum cleaner.
1. Turn on the hand-held vacuum cleaner by
pressing the three-in-one switch ("
(Fig. 7/B).
2. Press the three-in-one switch ("
to turn it off.
1. First empty the dust container, Chapter
5.1, "Emptying the dust container".
2. Now attach the wet nozzle (Fig. 8/A).
3. Angle the appliance to form a 90° angle,
Chapter 4.1, "Setting the angle of
inclination".
4. Turn on the hand-held vacuum cleaner by
pressing the three-in-one switch ("
B
5. As soon as the MAX mark (Fig. 8/B) has
been reached or you have finished wet
vacuuming:
- Switch off the appliance (Fig. 7/B).
- Empty the dust container, Chapter
5.1, "Emptying the dust container".
- Clean the dust container Chapter 5.2,
"Cleaning the dust container".
- Clean
"Cleaning the filters".
5 After use
the filters, Chapter
")
") again
").
5.3,