Changing The Preferences - Enraf Nonius Crosswalker Mode D'emploi

11 Changing the preferences

You can use the 'changing preferences' function to change the manufacturer's settings. These changes
can only be made by the therapist or coach. To access the preferences menu you need to perform a
special action (this is to prevent changes being made by unauthorised persons).
If you want to change the manufacturer's (preference) settings you can do this in this menu.
An example of manufacturer's settings is the quick-start option (chapter 6)
The manufacturer's settings are as follows (see Fig. 14):
• 'Constant Power' exercice
• Profile 1
• Training time 5:00 min
• Etc.
6
7
8
9
1
Fig. 13 Changing settings from the stand-by screen
6
7
8
9
1
Fig. 14 Settings screen after entering the preference
3 2
3 2
Access the preferences menu as
follows:
10
1. Keep the stop button (2) on the
Stand-by screen (fig. 13)
depressed for 5 seconds.
2. When the device switches itself
off, press buttons 6 and 9
4
simultaneously. Now the
preferences menu appears. (Fig.
14)
3. In this menu you can change
various settings using buttons 8
5
and 9. The pre-set values can
be adjusted with the rotary
button (3).
10
4
5
39