Trouble Shooting; Before You Call For Service - Silhouette Select DWC408BLSST Guide Du Propriétaire

Before You Call For Service

Problem
No Power
Cabinet Temperature
too High
"Clicking" Noise
Condensation on the
cabinet and/or door
If none of the above rectify the situation please contact our customer care department
at 1-800-26-

Trouble Shooting

Possible Cause
A fuse in your home may be
blown or the circuit breaker
tripped.
Power surge.
Plug not fully inserted into wall
outlet
Temperature setting
Door not shut properly or
opened excessively
Recently added a large
quantity of warm bottles to the
cabinet
Normal sound
High humidity conditions in the
home
Door not shut properly or
opened excessively
(1-800-263-2629)
What to do
Replace fuse or reset circuit breaker.
Unplug the wine cooler, wait a few
seconds and then plug it back in.
Make sure the 3-prong plug on the wine
cooler is fully inserted into outlet.
Verify the temperature control setting.
Adjust if neccessary.
Ensure that the door is fully closed and
that the gasket is sealing against the
cabinet. Open the door only as needed
and for short periods of time.
Limit the quantity of warm bottles being
introduced to the cabinet at the same
time. Attempt to phase in the load
introduction if possible.
No user intervention is required as this
sound is normal during the opera-tion of
the appliance. This audible 'clicking'
noise may be heard as the wine cooler
ends or begins a cooling cycle.
The condensation will subside once
humidity conditions return to normal.
Ensure that the door is fully closed and
that the gasket is sealing against the
cabinet. Open the door only as needed
and for short periods of time.
11