Oase Waterfall Spillway 8 in Notice D'emploi page 4

- English -
Installation
1. For maximum water flow, it is recommended that the
largest tubing size for your pump is used.
○ If needed, cut the adapter as shown using a hacksaw;
consult packaging for tubing size.
2. Assemble the Diverter, Gasket, and Adapter
3. Select a level location to place the waterfall spillway.
○ Begin by building a base with the desired waterfall
height.
4. Place the spillway onto the base.
NOTE: It is very important that the spillway is level, so be
sure to check that the structure is level from front to back
as well as left to right.
5. Connect tubing to the outlet adapter. Connect the other
side of the tubing to the pump. Place the pump in the pond.
NOTE: Tubing and pump are not included.
6. Continue building the rest of the structure. Carefully
cover the waterfall spillway and tubing with natural
material for a professional look.
NOTE: Design the structure to fit the tubing through the
back without any kinks.
1.
2.
3.
4.
5.
6.
4