Cleaning Mode Selection; Auto Mode - Tineco Pure One S12 Série Mode D'emploi

Product Operation

Cleaning Mode Selection

AUTO mode

• In AUTO mode, the power indicator and the color of dust monitoring loop change along with
the dust amount. The color change from red to blue as the place getting cleaner. You can get
the best cleaning solution automatically.
Note: Please do not use sharp objects to scratch or scrape the digital
display screen.
2 ways to enter AUTO mode:
The default setting is AUTO mode after
starting up, 3s to check blockage and
then detect the amount of dust. If no
dust detected, the power is reduced
to cruise power.
Light up
Or in the Manual mode, press AUTO for 2s,
AUTO indicator lights up and enters the AUTO
mode.
13
Clean: On Min
Power
Vary by dust
amount
Heavy Dirty: On
Max Power