Front Panel Layout - Vox AGA4-AT Manuel D'utilisation

Thank you for purchasing the VOX AGA4-AT All Tube Acoustic Guitar Amplifier.
The AGA4-AT is an all tube, 4-watt single combo amplifier specialized for acoustic guitars and other
pickup acoustic instruments. Equipped with an advanced reverb effect and tone circuit, you can easily
tailor your sound.
The AGA4-AT is also equipped with an external input terminal AUX IN. By connecting a keyboard or audio
equipment, you can practice at home and use it for various occasions as a portable public-address (PA)
system.

FRONT PANEL LAYOUT

1
1. Indicator
This will tell you if your amp is on or off!
2. POWER switch
This turns the amp on and off!
3. REVERB knob
This adjusts the reverb effect. You can deepen the effect by turning the knob clockwise.
NOTE: The reverb effect is not applied to the input sound from AUX IN terminal.
4. VOLUME knob
This adjusts the output of the amplifier.
You can adjust the input sound from the AUX IN terminal as well as the input sound of the INPUT
terminal.
5. TONE knob
This creates a vivid tone quality when turned clockwise.
The input sound from the AUX IN terminal and the input sound of the INPUT terminal have the same
effect.
6. INPUT Jack
Connect your guitar or other pickup equipped acoustic instrument here.
INTRODUCTION
2 3 4 5 6
3