Function Programming; Energy Saving - Gaggia TITANIUM PLUS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 60
14 fuNcTIoN pRogRAmmINg
The user can change some machine operating para-
meters according to personal needs.
14.1 MENU/OK command
In order to program functions you must access the programming mode by
pressing "MENU/OK" (28) when the machine is in a standby status.
To select the desired function, press the "∧" button to move up one
line or the "∨" button to move down on the display.
To exit the programming mode press "ESC"
14.2 Choosing individual functions
Select the desired function by pressing "∧" or "∨". Press
"MENU/OK" to enable the desired function; you can browse the
selectable settings using the "∧" or "∨" button; to store a setting
press "MENU/OK".
Note: by pressing "ESC" you can exit the programming
mode at any time without saving the changes made;
exiting without saving is possible only before you have pressed
"MENU/OK".
14.3 Description of programmable functions
ENERgy sAVINg
If the appliance is used little, it may be switched to the ENERGY SAVING
mode. This function allows electricity costs to be reduced. However, it is
recommended to switch the appliance off completely using the on/off
switch (7) if it is not to be used for a prolonged period. It will take the
machine just a few minutes to heat up when you switch it back on.
• In the programming mode press "∧" or "∨" to select the func-
tion:

ENERGY SAVING

and enable it by pressing "MENU/OK"; the following message will
appear:
ENERGY SAVING
in this mode the machine remains on but no components are active.
• To deactivate the "ENERGy SAVING" function, press "MENU/
OK".
Immediately after heating up, the appliance automatically eliminates
the water left standing in the internal circuit to ensure that only fresh
water will be used to make coffee.
The function is activated in the factory.
• To deactivate it, go to the programming mode and press "∧" or
"∨" to select the function:
RINSING
and enable it by pressing "MENU/OK". The following message will
appear:
RINSING
ON
Now press "∧" or "∨"to select
RINSING
ON
and store the selection by pressing "MENU/OK".
We recommend selecting:
RINSING
ON
This function allows you to change the language of the display. You
can choose among Italian, German, Portuguese, Spanish, English,
French and Dutch. The appliance is normally set on the language of
the country it is to be sold in.
• After accessing the programming mode, press "∧" or "∨" to select
the function:
LANGUAGE
and then enable it by pressing"MENU/OK".
The display will show:
LANGUAGE
ENGLISH
Press "∧" or "∨" to select the desired language and then press
"MENU/OK" to memorise it.
•  •
ENGLISH
RINsINg
RINSING
OFF
LANguAgE

Publicité

Table des Matières
loading

Table des Matières