Brewing Buttons Programming - Gaggia CONCETTO ER Mode D'emploi

STEAM
(Except COFFEE set-up)
Immerse the spout (17) in the beverage to be heated.
Turn the knob counterclockwise (13). When the required tempe-
rature is reached, close the knob (clockwise).
After every operation, clean the steam spout with a (damp
and clean) cloth/sponge from the residues of the
previously heated beverage.
(*) Before any brewing, place the milk suction tube (30 - F. 4)
inside the milk container.
(**) Adjust the cream quantity (24 - F. 4) (Pr. 12.8).
12.6

Brewing buttons programming

The beverage quantities linked to the respective buttons, can be
directly programmed by keypad.
To program and re-program the buttons follow these instruc-
tions:
- Switch on the machine and prepare it for the use
- Place the container under the selected spout
- Push and hold the button. The message "PROGRAMMING"
will be displayed
- Release the button and set the dose to be brewed
(***) (***) N.B.: Keys (***) (***) (***) ,
beverages with any possible combination of milk and
coffee. Please refer to an authorized customer service
center to change default settings.
Here is the button programming scheme.
CONCETTO ER CONCETTO ER CONCETTO ER
CONCETTO ER CONCETTO ER
and can be preset for brewing
38/124
English